LUXFilm™ is 5X stronger than Formvar. The supports are stable over the long beam exposures needed for tomography – without additional carbon coating. The films hold up to a variety of common stains* and to ethanol-based solutions.
LARGE UNOBSTRUCTED VIEWING WINDOWS – With a LUXFilm™ support, see your entire specimen without interference from grid wires.
FLAT – The films are stretched flat on the metal blank. Used in particle counting or screening applications, open area LUXFilm™ supports eliminate meniscus effects. Particles spread evenly, and do not collect next to the grid wires.
REDUCED CHARGING – The films exhibit very little drift or charging effects in the EM, compared with Formvar/carbon, improving imaging efficiency. |
THIN – LUXFilm™ TEM supports are thin (50nm) and uniform. Most applications will not require additional carbon coating.
WETTABILITY – LUXFilm™ has a favorable inherent surface energy for epoxy-embedded sections. Serial ribbons “stick” and go down flat. Surface treatment can be performed to prepare the supports for negative stains and acrylic-embedded specimens.
NO AUTOFLUORESCENCE – LUXFilm™ exhibits no autofluorescence and no unspecific labeling with antibody stains, making it an ideal choice for correlative microscopy and immunocytochemistry in the EM. The large, unobstructed viewing windows assure that you will find all labeled features, even if rare. |